Items where Subject is "Engineering"

Article

Acevedo-Jake, Amanda and Shi, Siyu and Siddiqui, Zain and Sanyal, Sreya and Schur, Rebecca and Kaja, Simon and Yuan, Alex and Kumar, Vivek A. (2021) Preclinical Efficacy of Pro- and Anti-Angiogenic Peptide Hydrogels to Treat Age-Related Macular Degeneration. Bioengineering, 8 (12). p. 190. ISSN 2306-5354

Addis, Solomon and Ejegu, Hermela and Dubale, Messay and Mamuye, Wondwossen and Wang, Lijing (2021) Development of Sustainable and Functional Fabrics from Recycled and Nanocomposite Polyester Fibers. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Adeolu, Olawuni and Abayomi, Babalola (2024) Design and Development of an Android-based Remote Cardiac Monitoring Device for Continuous Real-time ECG Signal Acquisition, Transmission, and Analysis. Journal of Engineering Research and Reports, 26 (4). pp. 42-58. ISSN 2582-2926

Ahmed, Mohammed Muqtader and Fatima, Farhat and Alali, Amer and Kalam, Mohd Abul and Alhazzani, Khalid and Bhatia, Saurabh and Alshehri, Sultan and Ghoneim, Mohammed M. and R, Lakshmipathy (2022) Ribociclib-Loaded Ethylcellulose-Based Nanosponges: Formulation, Physicochemical Characterization, and Cytotoxic Potential against Breast Cancer. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Ainerua, Emmanuela O. and Ossai, Blessing J. and Oboh, Innocent O. (2023) Simulation and Optimization of Bio-Methanol Production from Steam Gasification of Sugarcane Bagasse Using Aspen Plus. Journal of Engineering Research and Reports, 25 (6). pp. 55-65. ISSN 2582-2926

Al-Ragom, Fotouh (2021) Utilization of Crystalline and Amorphous Silica as a Sintering Inhibitor in Iron/Iron Oxide Thermochemical Water Splitting Cycle. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Alangari, Abdulaziz and Alqahtani, Mohammed S. and Mateen, Ayesha and Kalam, Mohd Abul and Alshememry, Abdullah and Ali, Raisuddin and Kazi, Mohsin and AlGhamdi, Khalid M. and Syed, Rabbani and R, Lakshmipathy (2022) Iron Oxide Nanoparticles: Preparation, Characterization, and Assessment of Antimicrobial and Anticancer Activity. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Ali, Babar and Yilmaz, Erol and Tahir, Ahmad Raza and Gamaoun, Fehmi and El Ouni, Mohamed Hechmi and Murtaza Rizvi, Syed Muhammad and Heidarzadeh, Akbar (2021) The Durability of High-Strength Concrete Containing Waste Tire Steel Fiber and Coal Fly Ash. Advances in Materials Science and Engineering, 2021. pp. 1-19. ISSN 1687-8434

Alshehri, Abdulelah S. and You, Fengqi (2021) Paradigm Shift: The Promise of Deep Learning in Molecular Systems Engineering and Design. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Amede, Ermias A. and Hailemariama, Ezra K. and Hailemariam, Leule M. and Nuramo, Denamo A. and Gloria, Antonio (2021) A Review of Codes and Standards for Bamboo Structural Design. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Anandan, Sivakumar and Alsubih, Majed (2021) Mechanical Strength Characterization of Plastic Fiber Reinforced Cement Concrete Composites. Applied Sciences, 11 (2). p. 852. ISSN 2076-3417

Araújo, Diana and Alves, Vítor D. and Marques, Ana C. and Fortunato, Elvira and Reis, Maria A. M. and Freitas, Filomena (2020) Low Temperature Dissolution of Yeast Chitin-Glucan Complex and Characterization of the Regenerated Polymer. Bioengineering, 7 (1). p. 28. ISSN 2306-5354

Aslam, Farhan (2023) Advancing Intelligence: Unveiling the Power of Advanced Machine Learning Algorithms for Real-World Applications. Journal of Engineering Research and Reports, 25 (7). pp. 159-165. ISSN 2582-2926

Baki, Abdulkader and Wiekhorst, Frank and Bleul, Regina (2021) Advances in Magnetic Nanoparticles Engineering for Biomedical Applications—A Review. Bioengineering, 8 (10). p. 134. ISSN 2306-5354

Balaji, Siripireddy and Mandal, Badal Kumar and Vinod Kumar Reddy, L. and Sen, Dwaipayan (2020) Biogenic Ceria Nanoparticles (CeO2 NPs) for Effective Photocatalytic and Cytotoxic Activity. Bioengineering, 7 (1). p. 26. ISSN 2306-5354

Barsoum, Nader and Zulkeffley, Nadira and Songkin, Myjessie (2018) Transient Stability Simulation of 33 kV Power Grid. Energy and Power Engineering, 10 (06). pp. 301-318. ISSN 1949-243X

Bedoya-Lora, Franky E. and Hankin, Anna and Kelsall, Geoff H. (2021) En Route to a Unified Model for Photoelectrochemical Reactor Optimization. II–Geometric Optimization of Perforated Photoelectrodes. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Brunetti, Adele and Roussanaly, Simon and Monteiro, Juliana and Anantharaman, Rahul and Pistidda, Claudio (2021) Editorial: From CO2 Emissions to Fuels and Chemicals: Current Development, Challenges and Perspectives. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Caballero, Jose A. and Pavão, Leandro V. and Costa, Caliane B. B. and Ravagnani, Mauro A. S. S. (2021) A Novel Sequential Approach for the Design of Heat Exchanger Networks. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Chang, Chun-Yi and Lin, Chien-Chi (2021) Hydrogel Models with Stiffness Gradients for Interrogating Pancreatic Cancer Cell Fate. Bioengineering, 8 (3). p. 37. ISSN 2306-5354

Choi, In-Oh and Oh, Ji-Su and Yu, Sang-Joun and Kim, Byung-Ock and Lee, Won-Pyo (2021) Retrospective Analysis of the Effect of Three-Dimensional Preformed Titanium Mesh on Peri-Implant Non-Contained Horizontal Defects in 100 Consecutive Cases. Applied Sciences, 11 (2). p. 872. ISSN 2076-3417

Ciulli, Enrico and Fazzolari, Francesco and Pugliese, Giovanni (2020) Contact Force Measurements in Cam and Follower Lubricated Contacts. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Crespo Sánchez, Eva and Spairani Berrio, Silvia and Onecha Perez, Belén and Marmolejo-Duarte, Carlos (2021) Perceived Benefits of Energy Efficiency in the Spanish Residential Market and Their Relation to Sociodemographic and Living Conditions. Applied Sciences, 11 (2). p. 875. ISSN 2076-3417

Dev, Shouvik and Guo, Hongsheng and Liko, Brian (2020) A Study on the High Load Operation of a Natural Gas-Diesel Dual-Fuel Engine. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Dimas, Christos and Alimisis, Vassilis and Uzunoglu, Nikolaos and Sotiriadis, Paul P. (2021) A Point-Matching Method of Moment with Sparse Bayesian Learning Applied and Evaluated in Dynamic Lung Electrical Impedance Tomography. Bioengineering, 8 (12). p. 191. ISSN 2306-5354

Dinislamova, Olga A. and Bugayova, Antonina V. and Shklyar, Tatyana F. and Safronov, Alexander P. and Blyakhman, Felix A. (2021) Echogenic Advantages of Ferrogels Filled with Magnetic Sub-Microparticles. Bioengineering, 8 (10). p. 140. ISSN 2306-5354

Dölle, Klaus and Byrnes, Nicole and Dristle, Sean and Fernandez, Tyler and Hussein, Mumin and Krauss, Colby and McCarthy, Brody and Sausville, Paul and Schoen, Johnny and Slavinskas, Jack and Wilson, Evan and Wojcikowski, Ian (2022) A Global Look at the Market Potential of Liquid Container Board and Its Ability to Reduce Plastic Waste – A Brief Review. Journal of Engineering Research and Reports, 23 (12). pp. 223-235. ISSN 2582-2926

Emeruwa, Chibuzo and Ekah, Ukoette Jeremiah (2022) Penetration Depth Analysis of UMTS Networks Using Received Signal Code Power. Journal of Engineering Research and Reports, 23 (7). pp. 16-25. ISSN 2582-2926

Feng, Yuan and Jiang, Song (2021) Nanomaterial Antibacterial Technology in the Design of Antibacterial Fabrics for Sports Clothing. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Formisano, Nello and Sahin, Gozde and Català, Pere and Truckenmüller, Roman and Nuijts, Rudy M. M. A. and Dickman, Mor M. and LaPointe, Vanessa L. S. and Giselbrecht, Stefan (2021) Nanoscale Topographies for Corneal Endothelial Regeneration. Applied Sciences, 11 (2). p. 827. ISSN 2076-3417

Galindo, José and Serrano, José Ramón and De La Morena, Joaquín and Samala, Vishnu and Guilain, Stéphane and Batard, Samuel (2021) Evaluation of a Double-Entry Turbine Model Coupled With a One-Dimensional Calibrated Engine Model at Engine Full Load Curves. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Galvão, Martim Debs and Rossi, Luis Natal and Gimenes, Andre Luiz Veiga and Udaeta, Miguel Edgar Morales (2018) Energy Planning Considering the Policy Dimension Seeking for Sustainable Development. Energy and Power Engineering, 10 (06). pp. 253-278. ISSN 1949-243X

Garcia-Martinez, Ramon-Gabriel and Reyes-Ortiz, Tania-Lucero and Herrera-Cortina, Gloria-Karina and Belmonte-García, Eduardo and Calihua-Pacheco, Lizbeth and Caballero-Morales, Santiago-Omar (2022) A Proposed Air-land Distribution Network for Delivery of Emergency Supplies in Mexico. Journal of Engineering Research and Reports, 23 (12). pp. 123-133. ISSN 2582-2926

Ge, Haiwen and Bakir, Ahmad Hadi and Yadav, Suren and Kang, Yunseon and Parameswaran, Siva and Zhao, Peng (2021) CFD Optimization of the Pre-Chamber Geometry for a Gasoline Spark Ignition Engine. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Gonçalves, Ana L. (2021) The Use of Microalgae and Cyanobacteria in the Improvement of Agricultural Practices: A Review on Their Biofertilising, Biostimulating and Biopesticide Roles. Applied Sciences, 11 (2). p. 871. ISSN 2076-3417

Grigoriadis, Panagiotis and Hoffmann, Alexander and La, Chi Binh (2021) Evaluation of Variable Compressor Technologies. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Guo, Xu (2024) A Review of Research on Recycled Aggregate Concrete Filled Steel Tube. Journal of Engineering Research and Reports, 26 (4). pp. 33-41. ISSN 2582-2926

Guo, Xufei and Han, Yan and Caggiano, Antonio (2021) Ultrasonic Total Focusing Imaging Method of Multilayer Composite Structures Using the Root-Mean-Square (RMS) Velocity. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Hamandi, Farah and Simon, Gerard and Laughlin, Richard and Goswami, Tarun (2020) Biomechanical Behavior of a Variable Angle Locked Tibiotalocalcaneal Construct. Bioengineering, 7 (1). p. 27. ISSN 2306-5354

Hidalgo-Alvarez, Veronica and Dhowre, Hala S. and Kingston, Olivia A. and Sheridan, Carl M. and Levis, Hannah J. (2021) Biofabrication of Artificial Stem Cell Niches in the Anterior Ocular Segment. Bioengineering, 8 (10). p. 135. ISSN 2306-5354

Huang, Junyu (2024) PCCP Mortar Protection Layer Research Progress. Journal of Engineering Research and Reports, 26 (4). pp. 59-66. ISSN 2582-2926

Ibitoye, B. A. and Mustapha, Sikirat Damilola (2022) Comprehension Analysis of Traffic Signs by Drivers on Urban Roads in Ilorin, Kwara State. Journal of Engineering Research and Reports. pp. 53-63. ISSN 2582-2926

Imran, Amer and Haghjoo, Mohammad Reza and Beigzadeh, Borhan (2023) Design of a novel above-knee prosthetic leg with a passive energy-saving mechanism. Engineering Solid Mechanics, 11 (4). pp. 339-352. ISSN 22918744

Istiaque, Arif and Khan, Shahidul Islam (2018) Impact of Ambient Temperature on Electricity Demand of Dhaka City of Bangladesh. Energy and Power Engineering, 10 (07). pp. 319-331. ISSN 1949-243X

Janesch, Eike and Pereira, Joana and Neubauer, Peter and Junne, Stefan (2021) Phase Separation in Anaerobic Digestion: A Potential for Easier Process Combination? Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Jantimapornkij, Patcharawee and Zerrer, Jörg and Buling, Anna (2021) Advanced Corrosion Protection of Additive Manufactured Light Metals by Creating Ceramic SurfaceThrough CERANOD® Plasma Electrolytical Oxidation Process. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Ji, Jun and Li, Dongting and Li, Yong and Jing, Yun (2020) Low-Frequency Broadband Acoustic Metasurface Absorbing Panels. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Jianu, Călin and Moleriu, Radu and Stoin, Daniela and Cocan, Ileana and Bujancă, Gabriel and Pop, Georgeta and Lukinich-Gruia, Alexandra Teodora and Muntean, Delia and Rusu, Laura-Cristina and Horhat, Delia Ioana (2021) Antioxidant and Antibacterial Activity of Nepeta × faassenii Bergmans ex Stearn Essential Oil. Applied Sciences, 11 (1). p. 442. ISSN 2076-3417

Junior, John Kwesi Quarm and Kankam, Charles Kwame (2022) The Strength Characteristics of Concrete Blended with Recycled Concrete, Quarry Dust and Broken Glass. Journal of Engineering Research and Reports, 23 (1). pp. 10-21. ISSN 2582-2926

Kamen, Edward W. (2021) The VIT Transform Approach to Discrete-Time Signals and Linear Time-Varying Systems. Eng, 2 (1). pp. 99-125. ISSN 2673-4117

Kang, Minjee and Lee, Chung-Sung and Lee, Min (2021) Bioactive Scaffolds Integrated with Liposomal or Extracellular Vesicles for Bone Regeneration. Bioengineering, 8 (10). p. 137. ISSN 2306-5354

Karimanzira, Divas and Rauschenbach, Thomas (2018) Optimal Utilization of Renewable Energy in Aquaponic Systems. Energy and Power Engineering, 10 (06). pp. 279-300. ISSN 1949-243X

Ke, Qingdi and Zhang, Peng and Zhang, Lei and Song, Shouxu (2020) Electric Vehicle Battery Disassembly Sequence Planning Based on Frame-Subgroup Structure Combined with Genetic Algorithm. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Khalili, Fardin and Gamage, Peshala T. and Taebi, Amirtahà and Johnson, Mark E. and Roberts, Randal B. and Mitchell, John (2021) Spectral Decomposition of the Flow and Characterization of the Sound Signals through Stenoses with Different Levels of Severity. Bioengineering, 8 (3). p. 41. ISSN 2306-5354

Kim, Eun Ju and Kim, Ho and Lee, Eunsil (2021) Influence of Ammonia Stripping Parameters on the Efficiency and Mass Transfer Rate of Ammonia Removal. Applied Sciences, 11 (1). p. 441. ISSN 2076-3417

Kim, Seongyong and Jeon, Tae Hyeon and Rhiu, Ilsun and Ahn, Jinhyun and Im, Dong-Hyuk (2021) Semantic Scene Graph Generation Using RDF Model and Deep Learning. Applied Sciences, 11 (2). p. 826. ISSN 2076-3417

Kourilova, Xenie and Pernicova, Iva and Vidlakova, Michaela and Krejcirik, Roman and Mrazova, Katerina and Hrubanova, Kamila and Krzyzanek, Vladislav and Nebesarova, Jana and Obruca, Stanislav (2021) Biotechnological Conversion of Grape Pomace to Poly(3-hydroxybutyrate) by Moderately Thermophilic Bacterium Tepidimonas taiwanensis. Bioengineering, 8 (10). p. 141. ISSN 2306-5354

Kästel, Peter and Gilroy-Scott, Bryce (2018) Economics of Pooling Small Local Electricity Prosumers—Prosumer vs Business as Usual Approach. Energy and Power Engineering, 10 (05). pp. 226-252. ISSN 1949-243X

Leidner, Johannes and Murtas, Fabrizio and Silari, Marco (2021) Medical Applications of the GEMPix. Applied Sciences, 11 (1). p. 440. ISSN 2076-3417

Li, Yinlei and Li, Lulu (2022) Design of Fuzzy Control System for Dissolved Oxygen Concentration in Aeration Tank. Journal of Engineering Research and Reports, 23 (1). pp. 1-9. ISSN 2582-2926

Li Ya, . and Jiming, Hu (2023) Design Optimization of Hammer Blade Crusher to Improve the Crushing Performance. Journal of Engineering Research and Reports, 25 (6). pp. 143-152. ISSN 2582-2926

Lifka, Sebastian and Baumgartner, Werner (2021) A Novel Screw Drive for Allogenic Headless Position Screws for Use in Osteosynthesis—A Finite-Element Analysis. Bioengineering, 8 (10). p. 136. ISSN 2306-5354

Liu, Guangqi and Ding, Qinghai and Luo, Haibo and Ju, Moran and Jin, Tianming and He, Miao and Dong, Gang (2021) A Novel Evolution Strategy of Level Set Method for the Segmentation of Overlapping Cervical Cells. Applied Sciences, 11 (1). p. 443. ISSN 2076-3417

Luchetta, Carolina and Oliveira Munsignatti, Erica C. and Pastore, Heloise O. (2021) CO2 Metallothermal Reduction to Graphene: The Influence of Zn. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Luftensteiner, Sabrina and Mayr, Michael and Chasparis, Georgios C. and Pichler, Mario (2021) AVUBDI: A Versatile Usable Big Data Infrastructure and Its Monitoring Approaches for Process Industry. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Maki, Taisuke and Takeda, Saki and Muranaka, Yosuke and Mae, Kazuhiro (2021) Silver Nanoparticle Synthesis Using an Inkjet Mixing System. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Manu, Isaac Yaw and Awere, Eric and Somiah, Matthew Kwaw (2022) Exploring the Underlying Constraints to the Use of Geosynthetics for Civil Engineering Infrastructure: A Study from Ghana. Journal of Engineering Research and Reports, 23 (10). pp. 13-23. ISSN 2582-2926

Markou, Giorgos (2021) Bioprocess Optimization for the Production of Arthrospira (Spirulina) platensis Biomass Enriched in the Enzyme Alkaline Phosphatase. Bioengineering, 8 (10). p. 142. ISSN 2306-5354

Marks, Tobias and Dahlmann, Katrin and Grewe, Volker and Gollnick, Volker and Linke, Florian and Matthes, Sigrun and Stumpf, Eike and Swaid, Majed and Unterstrasser, Simon and Yamashita, Hiroshi and Zumegen, Clemens (2021) Climate Impact Mitigation Potential of Formation Flight. Aerospace, 8 (1). p. 14. ISSN 2226-4310

Martinetti, Alberto and Chemweno, Peter K. and Nizamis, Kostas and Fosch-Villaronga, Eduard (2021) Redefining Safety in Light of Human-Robot Interaction: A Critical Review of Current Standards and Regulations. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Marton, Sofie and Langner, Christian and Svensson, Elin and Harvey, Simon (2021) Costs vs. Flexibility of Process Heat Recovery Solutions Considering Short-Term Process Variability and Uncertain Long-Term Development. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Metz, Isabel and Ellerbroek, Joost and Mühlhausen, Thorsten and Kügler, Dirk and Kern, Stefan and Hoekstra, Jacco (2021) The Efficacy of Operational Bird Strike Prevention. Aerospace, 8 (1). p. 17. ISSN 2226-4310

Mmonwuba, N. C. and Francis, Okoye Onyekachi and Somtochukwu, Okpala and Chinweike, Maduegbunna Patrick and Ezenwafor, Kizito and Ifunanya, G. Ezeolisa (2023) Effects of Solid Wastes (Leachates) on the Quality of Underground Water. Journal of Engineering Research and Reports, 24 (3). pp. 20-31. ISSN 2582-2926

Mourtzis, Dimitris and Angelopoulos, John and Panopoulos, Nikos (2020) Intelligent Predictive Maintenance and Remote Monitoring Framework for Industrial Equipment Based on Mixed Reality. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Najman, Katarzyna and Sadowska, Anna and Hallmann, Ewelina (2021) Evaluation of Bioactive and Physicochemical Properties of White and Black Garlic (Allium sativum L.) from Conventional and Organic Cultivation. Applied Sciences, 11 (2). p. 874. ISSN 2076-3417

Natrayan, L. and Rajalakshmi, R. and Amandeep Singh, K. and Patil, Pravin P. and Veeman, Dhinakaran and Paramasivam, Prabhu and R, Lakshmipathy (2022) Synthesis and Optimization of Cr (VI) Removal from Aqueous Solution by Activated Carbon with Magnetic Fe3O4Nanoparticles by Response Surface Methodology. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Nebrida, Jimmy A. (2022) Automated Onsite Construction: 3D Printing Technology. Journal of Engineering Research and Reports, 23 (1). pp. 47-55. ISSN 2582-2926

Norrefeldt, Victor and Mayer, Florian and Herbig, Britta and Ströhlein, Ria and Wargocki, Pawel and Lei, Fang (2021) Effect of Increased Cabin Recirculation Airflow Fraction on Relative Humidity, CO2 and TVOC. Aerospace, 8 (1). p. 15. ISSN 2226-4310

Novidzro, Kosi Mawuéna and Kolor, Kwami Aldo Eric and Megnassan, Sassou and Koumaglo, Kossi Honoré (2023) Valorization of Griffonia simplicifolia Seed Oil for Biodiesel Production: A Sustainable Alternative. Engineering, 15 (11). pp. 759-781. ISSN 1947-3931

Ocher, Rebecca A. and Padilla, Erika and Hsu, Jonathan C. and Taub, Pam R. and Ercan, Ertugurul (2021) Clinical and Laboratory Improvement in Hyperadrenergic Postural Orthostatic Tachycardia Syndrome (POTS) after COVID-19 Infection. Case Reports in Cardiology, 2021. pp. 1-3. ISSN 2090-6404

Olaniyi, Oluwaseun Oladeji and Omogoroye, Olajide Oyebola and Olaniyi, Folashade Gloria and Alao, Adegbenga Ismaila and Oladoyinbo, Tunbosun Oyewale (2024) CyberFusion Protocols: Strategic Integration of Enterprise Risk Management, ISO 27001, and Mobile Forensics for Advanced Digital Security in the Modern Business Ecosystem. Journal of Engineering Research and Reports, 26 (6). pp. 31-49. ISSN 2582-2926

Olufemi, T. T. and Akinwole, O. O. (2023) Application of Internet of Things (IoT) in Nigerian Power Grid Management. Journal of Engineering Research and Reports, 25 (2). pp. 89-93. ISSN 2582-2926

Onawumi, A. S. and Akinrinade, N. A. and Olojede, M. A. and Ajayeoba, A. O. (2022) Development of a Solar Power Generating System with Auto-Tracking and Data Logging Devices. Journal of Engineering Research and Reports, 23 (12). pp. 212-222. ISSN 2582-2926

Ortíz-de-Lira, Alejandra and Reynel-Ávila, Hilda Elizabeth and Díaz-Muñoz, Lizbeth Liliana and Mendoza-Castillo, Didilia Ileana and Aminabhavi, Tejraj M. and Badawi, Michael and Bonilla-Petriciolet, Adrián and Tran, Nguyen Hai (2022) Sustainable Downstream Separation of Itaconic Acid Using Carbon-Based Adsorbents. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Ou, Wei-Liang and Kuo, Tzu-Ling and Chang, Chin-Chieh and Fan, Chih-Peng (2021) Deep-Learning-Based Pupil Center Detection and Tracking Technology for Visible-Light Wearable Gaze Tracking Devices. Applied Sciences, 11 (2). p. 851. ISSN 2076-3417

Oyakhilomen Omogbai, Nelson (2023) Derived Functions for MATLAB Non-linear Solvers – an optimal Stator Slot Design Stopgap. Journal of Engineering Research and Reports, 24 (4). pp. 8-14. ISSN 2582-2926

Panagiotou, Pericles and Dimopoulos, Thomas and Dimitriou, Stylianos and Yakinthos, Kyros (2021) Quasi-3D Aerodynamic Analysis Method for Blended-Wing-Body UAV Configurations. Aerospace, 8 (1). p. 13. ISSN 2226-4310

Pang, Yansong (2023) A Review of Integrated Control Technology of Tension Stringing Equipment in Transmission Line Erection. Journal of Engineering Research and Reports, 25 (9). pp. 19-27. ISSN 2582-2926

Ravikumar, Arjun and Rostron, Paul and Vahdati, Nader and Shiryayev, Oleg (2021) Parametric Study of the Corrosion of API-5L-X65 QT Steel Using Potentiostat Based Measurements in a Flow Loop. Applied Sciences, 11 (1). p. 444. ISSN 2076-3417

Reverter, Ferran (2024) A Tutorial on Mechanical Sensors in the 70th Anniversary of the Piezoresistive Effect. Sensors, 24 (11). p. 3690. ISSN 1424-8220

Reyes, Delfino and Martínez, David and Mayorga, Miguel and Heo, Hyeonu and Walker, Ezekiel and Neogi, Arup (2020) Optimization of the Spatial Configuration of Local Defects in Phononic Crystals for High Q Cavity. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Ross, Colton J. and Zheng, Junnan and Ma, Liang and Wu, Yi and Lee, Chung-Hao (2020) Mechanics and Microstructure of the Atrioventricular Heart Valve Chordae Tendineae: A Review. Bioengineering, 7 (1). p. 25. ISSN 2306-5354

Rossetti, Ilenia and Conte, Francesco and Ramis, Gianguido (2021) Kinetic Modelling of Biodegradability Data of Commercial Polymers Obtained under Aerobic Composting Conditions. Eng, 2 (1). pp. 54-68. ISSN 2673-4117

Roy, Arunabha M. (2021) Finite Element Framework for Efficient Design of Three Dimensional Multicomponent Composite Helicopter Rotor Blade System. Eng, 2 (1). pp. 69-79. ISSN 2673-4117

Russell, Anthony P. and Garner, Austin M. (2021) Setal Field Transects, Evolutionary Transitions and Gecko–Anole Convergence Provide Insights Into the Fundamentals of Form and Function of the Digital Adhesive System of Lizards. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Sabharwal, Chaman Lal (2021) An Iterative Hybrid Algorithm for Roots of Non-Linear Equations. Eng, 2 (1). pp. 80-98. ISSN 2673-4117

Saha, Priyanka and Datta, Suchisnigdha and Ghosh, Sukanya and Samanta, Anurima and Ghosh, Paramita and Sinha, Dona (2021) Bioengineering of Extracellular Vesicles: Exosome-Based Next-Generation Therapeutic Strategy in Cancer. Bioengineering, 8 (10). p. 139. ISSN 2306-5354

Salami, A. and Garba, A. and Adamu, I. A. (2023) Comparative Cost and Design of Solid, Ribbed and Waffle Slab for a Three-storey Shopping Complex Using Prota, Orion and Spreadsheet. Journal of Engineering Research and Reports, 25 (8). pp. 157-169. ISSN 2582-2926

Salique, Florian and Musina, Ancuta and Winter, Marc and Yann, Nedelec and Roth, Philippe M. C. (2021) Continuous Hydrogenation: Triphasic System Optimization at Kilo Lab Scale Using a Slurry Solution. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Saxena, Tanvi and Chawla, V.K. (2023) Elastic properties evaluation of banana-hemp fiber-based hybrid composite with nano-titanium oxide filler: Analytical and Simulation Study. Engineering Solid Mechanics, 12 (1). pp. 65-80. ISSN 22918744

Seitz, Arne and Habermann, Anaïs Luisa and Peter, Fabian and Troeltsch, Florian and Castillo Pardo, Alejandro and Della Corte, Biagio and van Sluis, Martijn and Goraj, Zdobyslaw and Kowalski, Mariusz and Zhao, Xin and Grönstedt, Tomas and Bijewitz, Julian and Wortmann, Guido (2021) Proof of Concept Study for Fuselage Boundary Layer Ingesting Propulsion. Aerospace, 8 (1). p. 16. ISSN 2226-4310

Shamrukh, Mohamed and Akib, Shatirah (2021) Trendline and Monthly Variations of Nitrate in Water Supply Wells in Upper Egypt. Eng, 2 (1). pp. 43-53. ISSN 2673-4117

Shifa, Tofik Ahmed and Mazzaro, Raffaello and Morandi, Vittorio and Vomiero, Alberto (2021) Controllable Synthesis of 2D Nonlayered Cr2S3 Nanosheets and Their Electrocatalytic Activity Toward Oxygen Evolution Reaction. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Su, Xiaoyu and Feng, Zengchao and Cai, Tingting and Shen, Yongxing and Kyzas, George (2022) Coal Permeability Variation during the Heating Process considering Thermal Expansion and Desorption Shrinkage. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Suzuki, Sayaka and Manzello, Samuel L. (2021) Investigating the Effect of Structure to Structure Separation Distance on Firebrand Accumulation. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Tajudeen, Dosumu, Tijani and Ugwoha, Ejikeme and Omowunmi, Blessing (2023) Exhaust Emission Assessment of Haulage Trucks at Onne Port, Nigeria. Journal of Engineering Research and Reports, 25 (12). pp. 227-236. ISSN 2582-2926

Takano, Atsushi and Kitamura, Ryuta and Masai, Takuma and Bao, Jingxuan (2021) Buckling Test of Composite Cylindrical Shells with Large Radius Thickness Ratio. Applied Sciences, 11 (2). p. 854. ISSN 2076-3417

Tang, Jun and Li, Shengcai and Zhu, Yongfu and Jia, Yunzhong (2021) Measurement and Analysis of Settlement Induced by Rectangular Pipe Jacking in Silt Stratum. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Thielen, Marc and Voigt, Dagmar and Gallenmüller, Friederike and Speck, Thomas and Gorb, Stanislav (2021) “Push and Pull”: Biomechanics of the Pollination Apparatus of Oncidium spp. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Thomas, Tatiana and Sudesh, Kumar and Bazire, Alexis and Elain, Anne and Tan, Hua Tiang and Lim, Hui and Bruzaud, Stéphane (2020) PHA Production and PHA Synthases of the Halophilic Bacterium Halomonas sp. SF2003. Bioengineering, 7 (1). p. 29. ISSN 2306-5354

Torres-Contreras, Ignacio and Jáuregui-Correa, Juan Carlos and López-Cajún, Carlos Santiago and Echeverría-Villagómez, Salvador (2021) Effects of Phase Shift Errors in Recurrence Plot for Rotating Machinery Fault Diagnosis. Applied Sciences, 11 (2). p. 873. ISSN 2076-3417

Trono, Gaspare and Nicolì, Angelo and Muscolo, Giovanni Gerardo (2020) Sustainable Compliant Physical Interaction in a Biped-Wheeled Wearable Machine. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Tsao, Lung-Chuan and Li, Cheng-Kai and Sun, Yu-Kai and Chang, Shih-Ying and Chuang, Tung-Han and Samuel, F.H. (2021) Fluxless Direct Soldering of Transparent Conductive Oxides (TCOs) to Copper. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

U., Stephen B. and E., Archibong E. and M., Asuquo P. (2024) Mobile Payment Applications in Countries with Low Financial Inclusion: A Multi-stakeholder Perspective Review. Journal of Engineering Research and Reports, 26 (2). pp. 14-32. ISSN 2582-2926

Uchiyama, Yuya and Fujimura, Soichiro and Takao, Hiroyuki and Suzuki, Takashi and Hayakawa, Motoharu and Ishibashi, Toshihiro and Karagiozov, Kostadin and Fukudome, Koji and Murayama, Yuichi and Yamamoto, Makoto (2021) Hemodynamic Investigation of the Effectiveness of a Two Overlapping Flow Diverter Configuration for Cerebral Aneurysm Treatment. Bioengineering, 8 (10). p. 143. ISSN 2306-5354

Umeagukwu, O. E. and Onukwuli, O. D. and Ude, C. N. and Asadu, C. O. (2022) Methanolysis of Africa Pear Seed Oil via Thermally Activated Empty Palm Fruit Bunch Ash (TAEPFBA) Catalyst, ANN Prediction and Sensitivity Analysis. Journal of Engineering Research and Reports, 23 (12). pp. 87-103. ISSN 2582-2926

Wang, Song and Cao, Yunyu (2022) Analysis of Planetary Gear Transmission Characteristics Based on ANSYS. Journal of Engineering Research and Reports, 23 (1). pp. 22-32. ISSN 2582-2926

Wang, Yuan and Qian, Xu and Zheng, Guokui and Tian, Ziqi and Zhang, Qiuju (2021) Boron-Doped MXenes as Electrocatalysts for Nitrogen Reduction Reaction: A Theoretical Study. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Wu, Mingkang and Jiang, Haobin and Tan, Chin-An (2021) Automated Parking Space Allocation during Transition with both Human-Operated and Autonomous Vehicles. Applied Sciences, 11 (2). p. 855. ISSN 2076-3417

Xicheng, Wang (2023) Study on the Effect of Fly Ash Admixture on the Performance of Recycled Pervious Concrete. Journal of Engineering Research and Reports, 25 (7). pp. 101-110. ISSN 2582-2926

Xue, Heng and Lyu, Jinbei and Wang, Fengxue and Liao, Hongxin and Kim, Jonghyun and Pan, Fusheng and Ares, Alicia E. (2021) Effect of the Partial Substitution of Zn with Co, Ni, and Co-Ni on Microstructures and Mechanical Properties of Long-Period Stacking Ordered Dominant Mg-Y-Zn Alloys. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Yan, Guoshun and Li, Jiazheng and Lin, Yuqiang and Chen, Xia and Leonelli, Cristina (2021) Difference between Internal and External Hydration of Hardened Cement Paste under Microwave Curing. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Yan, Si and Miao, Yong-hong and Yin, Jie (2022) Nonlinear Radial Consolidation Analysis of Vertical Drains Foundation under Cyclic Loadings. Journal of Engineering Research and Reports, 23 (1). pp. 33-46. ISSN 2582-2926

Yang, Jing and Hou, Peng and Yang, Caiqian and Zhang, Yang (2021) Study on the Method of Moving Load Identification Based on Strain Influence Line. Applied Sciences, 11 (2). p. 853. ISSN 2076-3417

Yousefi, Amin and Birouk, Madjid and Guo, Hongsheng (2020) On the Variation of the Effect of Natural Gas Fraction on Dual-Fuel Combustion of Diesel Engine Under Low-to-High Load Conditions. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Zenone, Arturo and Filippov, Alexander E. and Kovalev, Alexander and Badalamenti, Fabio and Gorb, Stanislav N. (2020) Root Hair Adhesion in Posidonia oceanica (L.) Delile Seedlings: A Numerical Modelling Approach. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Zhang, Yang and Arakelian, Vigen (2021) Design and Synthesis of Single-Actuator Walking Robots via Coupling of Linkages. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Zhang, Yufang and Liu, Hongyu and Li, Jian and Huang, Qidi and Ma, Xianjie and Li, Wei and Song, Zhengyang (2021) Research on the Mechanism of the Influence of Earthquake-Induced Landslides on the Stress and Deformation Characteristics of Tunnel. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Zhang, Zhiyin (2023) Review on the Role of Ultra-fine Fly Ash on the Performance of Concrete. Journal of Engineering Research and Reports, 25 (7). pp. 94-100. ISSN 2582-2926

Zheng, Haixia and Wei, Wei (2023) A Personalized Adverse Drug Reaction Early Warning Method Based on Contextual Ontology and Rules Learning. Journal of Software Engineering and Applications, 16 (11). pp. 605-621. ISSN 1945-3116

de Barros, Régis de Matos Curvelo and das Neves, Mauricio David Martins (2023) Residual Stress and Fracture Toughness Study in A516 Gr70 Steel Joints Welded and Repaired by Arc Processes. Engineering, 15 (11). pp. 749-758. ISSN 1947-3931

de-Juan-Ripoll, Carla and Llanes-Jurado, José and Giglioli, Irene Alice Chicchi and Marín-Morales, Javier and Alcañiz, Mariano (2021) An Immersive Virtual Reality Game for Predicting Risk Taking through the Use of Implicit Measures. Applied Sciences, 11 (2). p. 825. ISSN 2076-3417

Book Section

UNSPECIFIED (2020) Scientific Approach on Design and Fabrication of Automated Inbuilt Hydraulic Jack for Light Motor Vehicle. In: Kumar, R. S. Mohan and Vinayagamoorthi, M. A., (eds.) Recent Developments in Engineering Research Vol. 2. B P International, pp. 68-77. ISBN 978-93-90206-88-9

Akhator, E. P. and Igbinomwanhia, D. I. and Obanor, A. I. (2020) Commercial Biogas Production from Domestic Solid Waste. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 81-88. ISBN 978-93-89816-99-0

Antunovic, R. and Vucetic, N. and Halep, A. (2021) Recent Study on Failure Diagnosis and Prognosis of Sliding Bearings. In: Advanced Aspects of Engineering Research Vol. 10. B P International, pp. 10-25. ISBN 978-93-90888-93-1

Balamuralikrishnan, R. and Jeyasehar, C. Antony (2022) Retrofitting of RC Beams with Externally Bonded SIMCON Laminates: A Prospective Retrofit System. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 119-131. ISBN 978-93-5547-282-3

Balamuralikrishnan, R. and Jeyasehar, C. Antony (2022) A Study on RC Beams with Externally Bonded Carbon Fiber Reinforced Polymer (CFRP) Fabrics. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 132-145. ISBN 978-93-5547-282-3

Bernabe, Jocelyn Aoalin (2021) Determination of Promising Peanut Lines in Northeastern Philippines. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 94-101. ISBN 978-93-91882-95-2

Bhatia, Umesh and Sohani, N. (2021) Evaluation of Quality Improvement through Self Quality Audits: A Case in Lamp Industry. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 73-78. ISBN 978-93-91882-95-2

Filipov, A. A. and Pachurin, G. V. and Kozinov, D. Yu and Gevogian, G. A. (2021) Formation of the Structure and Mechanical Properties of Rolled Products for Cold Heading of Bolted Metal Products. In: Advanced Aspects of Engineering Research Vol. 10. B P International, pp. 71-79. ISBN 978-93-90888-93-1

George, Ginu Ann and Thomas, Tomson and Prince, A. and V. Jayan, M. (2021) Charge Equalization of Battery System Considering State of Charge Variations in Electric Vehicle Application. In: Advanced Aspects of Engineering Research Vol. 10. B P International, pp. 26-33. ISBN 978-93-90888-93-1

Hwang, Yongha (2022) Standalone Thermopneumatic Micro Bellows Actuator using 3D Printing Technology. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 146-156. ISBN 978-93-5547-282-3

Jovanovic, T. and Koruga, Dj. and Jovancicevic, B. (2020) IR Spectroscopic Characterization of the C76-D2 and C84-D2:22 Isomers for their Qualitative and Quantitative Determination. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 138-153. ISBN 978-93-90516-95-7

Kanthalakshmi, S. and Raghappriya, M. and Latha, R. (2021) Fault Tolerant Control Design for Linear Systems with Appropriate Performance Degradation Using Eigen Structure Assignment. In: Advanced Aspects of Engineering Research Vol. 10. B P International, pp. 34-48. ISBN 978-93-90888-93-1

Kavitha, S. and Pavithra, S. and Karthikeyan, S. (2020) Deep Learning based Performance Analysis of Nutritional Contents in Food Images. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 58-67. ISBN 978-93-90206-88-9

Kohli, Nikhil and Sivarajan, S. (2020) Improvisation and Modification in Gearbox Components to Expedite Production. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 89-99. ISBN 978-93-89816-99-0

Kovziridze, Zviad (2020) Discussion on Formula of Thermogradient Effect. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 45-49. ISBN 978-81-947204-1-6

Lee, Jyun-Long and Huang, Wen-Cheng (2021) Investigating the Impact of Climate Change on the Irrigation Water Requirement in Northern Taiwan. In: Advanced Aspects of Engineering Research Vol. 10. B P International, pp. 49-70. ISBN 978-93-90888-93-1

Liu, Shanglin and Yang, Kaihong and Cai, Jie and Zhou, Siyang and Zhang, Qian (2022) Prediction of Geological Parameters during Tunneling by Time Series Analysis on In-situ Data: A Recent Study. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 78-97. ISBN 978-93-5547-282-3

Loganina, V. I. and Sadovnikova, M. A. and Skachkov, Yu. P. (2020) The Rheological Properties of the Finishing Lime Composition with Additive Based on Synthetic Aluminosilicates: Recent Study. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 100-107. ISBN 978-93-89816-99-0

Lokhande, Netra (2020) Real Time Static Gesture Recognition Using Time of Flight Camera: Scientific Approach. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 69-80. ISBN 978-93-89816-99-0

Monisha, M. and Rajendran, V. (2020) Performance of Cognitive-LPWAN: Hungarian Spectrum Optimization and Sharing for Hybrid Low Power Wide Area Networks. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 50-56. ISBN 978-93-90206-88-9

Murugesh, V. and Thirumurugan, A. and Sadhasivam, M. and Sudharsanan, M. (2021) Research on Experimental Behaviour of Water Hyacinth Ash as Partial Replacement of Cement on Short Column. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 159-167. ISBN 978-93-90768-21-9

Pattanaik, Ashutosh and Mishra, Subash Chandra and H., Adarsha (2021) Investigation on Micro-structural Analysis of Fly Ash and Clay Compacts. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 79-84. ISBN 978-93-91882-95-2

Rafique, Muhammad Musaddique Ali (2020) Emphasizing on Production and Characterization of Zr Based Bulk Metallic Glass Matrix Composites (BMGMC) in the Form of Wedge Shape Ingots. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 83-107. ISBN 978-81-947204-1-6

Rafique, Muhammad Musaddique Ali (2020) Estimation of Inoculation Effect on Phase Formation and Indentation Hardness Behaviour of Zr47.5Cu45.5Al5Co2 and Zr65Cu15Al10Ni10 Bulk Metallic Glass Matrix Composites. In: https://bp.bookpi.org/index.php/bpi/catalog/book/263. B P International, pp. 108-136. ISBN 978-81-947204-1-6

Rafique, Muhammad Musaddique Ali (2020) Recent Studies on Probabilistic Modelling of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites during Solidification in Additive Manufacturing. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 50-61. ISBN 978-81-947204-1-6

Rafique, Muhammad Musaddique Ali (2020) Research on the Simulation of Solidification Parameters during Zr Based Bulk Metallic Glass Matrix Composite’s (BMGMCs) Additive Manufacturing. In: Recent Developments in Engineering Research Vol. 4. B P International, pp. 62-82. ISBN 978-81-947204-1-6

Randriamparany, Mamisoa and Ratsaramody, Justin and Randriazanamparany, Michel (2021) A Comparative Perspective of Numerical Methods for Shallow Water Equations for Flood Application. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 65-72. ISBN 978-93-91882-95-2

Rao, G. Nageswara (2021) Study on Modelling and Analysis of a Dynamic Voltage Restorer (DVR) and Sinusoidal Pulse Width Modulation (SPWM) Based Controller. In: New Approaches in Engineering Research Vol. 11. B P International, pp. 85-93. ISBN 978-93-91882-95-2

Salmasi, Farzin and Abraham, John and Salmasi, Arian (2022) Design Considerations for Pumping Stations Using Variable Speed Pumps. In: Novel Perspectives of Engineering Research Vol. 10. B P International, pp. 98-118. ISBN 978-93-5547-282-3

Selvaganapathy, T. and Muthuvelayudham, R. and Kumar, M. Jaya (2020) Simulation of Waste Plastic Pyrolysis Process Using Aspen Hysys V9 Simulator under Steady State Operating Condition. In: Emerging Trends in Engineering Research and Technology Vol. 2. B P International, pp. 108-118. ISBN 978-93-89816-99-0

Stud, A. Charles and Ramamurthy, N. (2020) Experiments on the Interpolation of the Histogramed MR Brain Images for Resolution Enhancement. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 88-94. ISBN 978-93-90206-88-9

Toderaş, Mihaela and Danciu, Ciprian (2020) Emphasizing the Safety, Health and Hazards Related to Using of Sprayed Concrete in Underground Mining Works. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 129-137. ISBN 978-93-90516-95-7

Zanati, E. El and Farg, E. (2020) Research on Modeling of Catalytic Multi Bore Hollow Fiber Membrane Plug Flow Reactor. In: Recent Developments in Engineering Research Vol. 2. B P International, pp. 78-87. ISBN 978-93-90206-88-9

Zhilevski, Marin and Mikhov, Mikho (2020) Detailed Study of Spindle Drives for Boring Machines. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 117-128. ISBN 978-93-90516-95-7